RUSTY® UP/DOWN WL

outdoor LED surface-mounted wall light round rust CCT switch 3000/4000 K, More

Item no.: 1004651

Sale only to registered specialist dealers. Log in now or become a dealer.
100+ in Stock

Description

In multi-faceted rust tones, RUSTY® UP/DOWN gives an attractive appearance to facades. For a unique look that will give this wall-mounted light a contrasting effect on any surface. This is made possible by the special chemical treatment of the FeCSi steel used, which only becomes more beautiful as it is exposed to the elements. These indirect lights are fitted with energy-efficient and long-lasting SMD LEDs. To alter the lighting mood, select the desired light colour before installation using the integrated CCT switch (3000 K/4000 K). RUSTY® UP/DOWN is easy to install and perfectly suitable for outdoor areas thanks to its IP65 protection rating.
Technical overview

Indirect lighting - beam angle This value describes the beam angle of the indirect lighting. The smaller the angle, the more concentrated the light will be.

Direct lighting - beam angle This value describes the beam angle in degrees. The smaller the angle, the more concentrated the light will be.

Average lifespan in h The average lifespan of a lightbulb or light source in hours.

IP protection rating The IP protection class indicates the suitability of electrical equipment for different environmental conditions.

IK impact resistance rating The IK impact resistance rating is a measure of the resistance of the housing of electrical equipment to mechanical stress, especially impact stress.

Light source can be replaced by a specialist The (included) light source can only be replaced by a specialist.

Lighting family This product belongs to an SLV light family

CCT switch By using the CCT switch integrated in this product, the light colour can be configured at installation to 3000K or 4000K.

Energy efficiency class The energy efficiency class refer to the (contained) light source.

Technical data

Product name
RUSTY® UP/DOWN
BIG WHITE Page
894
Colour
rust/anthracite
Material
FeCSi-steel
electrical power
14 W
Luminous flux
249 / 254 lm
Colour temperature
4000 Kelvin
Half beam angle
65 / 65 °
CRI
80
Different light outlets
2
CCT Switch
Yes
IP Code
IP65
Width
14 cm
Height
18 cm
Depth
16.5 cm
Shock resistance category
IK02
Shock resistance
0.2 joule
Primary nominal voltage
220-240V ~50/60 Hz
Secondary power / secondary voltage
350 mA
Ambient temperature
-20 - 45 °C
Net weight
3.49 kg
Weighted consumption
14 kWh/1.000h
Service life
25000 h
Inrush current level
9 A
Inrush current duration
140 μs
Risk group
1
Manual (pdf)
Removal instructions (pdf)
CE declaration (pdf)
Datasheet (pdf)
REACh (pdf)

Our RUSTY Luminaire family

  • Whole family
  • Wall lights
  • Floor lamps
  • Ground spike
Process is loading
Please wait...