outdoor wall light, LED, 3000K, anthracite, with sensor,More
Item no.: 232915
500+ in Stock
The puristic ORDI Wall Luminaire is outfitted with warm white SMD LEDs, and creates broad, even surface illumination. Thanks to its integrated infra-red movement sensor, the lights are suited for the highest requirements for outside lighting. Connects directly to 230V electrical mains.
BIG WHITE Page
CRI= Colour Rendering Index (colour rendering index Ra). Describes the quality of artificial light compared to daylight (Ra=100) . The higher the value is, the more natural the rendering of illuminated colours.
Requirement for safety measures in place against electric shocks, applying to electric devices.
Protection category I: Protective earthing
Protection category II: Protective insulation
Protection category III: Protective extra-low voltage
Describes the life cycle of a LED.
L= Preservation of luminous flux in %
B= Proportion of modules affected in %
L70B10 therefore means that a maximum 10% of modules attain less than 70% of the original luminous flux.
Describes the deviation of the colour point or colour consistency that may arise within several batches of the same products.
IP = Ingress Protection. Indicates the level of protection for the housing against external influences, in compliance with DIN EN 60529. The first figure describes protection against foreign bodies, the second figure describes protection against water. The higher the individual values are, the higher the respective protection level is.
Secondary power / secondary voltage
Primary nominal voltage
maximum ambient temperature
Describes the maximum temperature that should not be exceeded, so that device life expectancy is not negatively influenced, and functioning continues optimally for as long as possible.
minimum ambient temperature
Describes the minimum temperature required, so that device life expectancy is not negatively influenced, and functioning continues optimally for as long as possible.
LED can be changed
LED lightsource not replaceable
Luminous intensity distribution
Describes the spatial dispersion traits of a light source.
Also called radiation angle, describing the angle between two points, at which luminosity falls to 50% of the maximum value.