LENITO series modern 240V LED display spotlight. The premium LEDs are within the grid. This rotating and swivelling luminaire is available in different colours, and provides wide, homogeneous illumination. The screw clamps has a wing nut for ease of installation. There is also a switch on the connection lead.
BIG WHITE Page
CRI= Colour Rendering Index (colour rendering index Ra). Describes the quality of artificial light compared to daylight (Ra=100) . The higher the value is, the more natural the rendering of illuminated colours.
Requirement for safety measures in place against electric shocks, applying to electric devices. Protection category I: Protective earthing Protection category II: Protective insulation Protection category III: Protective extra-low voltage
Describes the life cycle of a LED. L = Preservation of luminous flux in % B= Proportion of modules affected in % L70B10 therefore means that a maximum 10% of modules attain less than 70% of the original luminous flux.
Describes the deviation of the colour point or colour consistency that may arise within several batches of the same products. (Unit: SDCM)
IP = Ingress Protection. Indicates the level of protection for the housing against external influences, in compliance with DIN EN 60529. The first figure describes protection against foreign bodies, the second figure describes protection against water. The higher the individual values are, the higher the respective protection level is.
Secondary power / secondary voltage
Indicates which impact energy the light can be exposed to. This value is important, for example when determining if lighting is safe enough to throw balls in sports halls. (Unit: Joule)
Primary nominal voltage
Shock resistance category
Indicates resistance or impact resistance levels of electrical equipment housings against mechanical wear and tear. The higher the category is, the higher the level of protection. (Unit: IK)
Vertical tilting range
Horizontal rotation range
maximum ambient temperature
Describes the maximum temperature that should not be exceeded, so that device life expectancy is not negatively influenced, and functioning continues optimally for as long as possible.
minimum ambient temperature
Describes the minimum temperature required, so that device life expectancy is not negatively influenced, and functioning continues optimally for as long as possible.
Also called radiation angle, describing the angle between two points, at which luminosity falls to 50% of the maximum value.
Rotating or tilting
Rotating and pivoting
LED can be changed
Exchange of lightsource only by professional
Luminous intensity distribution
Describes the spatial dispersion traits of a light source.