professional pendant, LED, 4000K, black, 2 m, 85W,More
Item no.: 1001409
100+ in Stock
Fast calculation tool
Fast calculation tool
The GLENOS pendant with a high-performance LED strip gives you a powerful, top-class LED lighting. The pendants are available in several lengths and colour variants and are fitted with a 2.50 m connection lead, which can be shortened individually. The GLENOS pendant is ready to connect to the 230 V mains supply thanks to the dimmable LED driver.
BIG WHITE Page
CRI= Colour Rendering Index (colour rendering index Ra). Describes the quality of artificial light compared to daylight (Ra=100) . The higher the value is, the more natural the rendering of illuminated colours.
Requirement for safety measures in place against electric shocks, applying to electric devices.
Protection category I: Protective earthing
Protection category II: Protective insulation
Protection category III: Protective extra-low voltage
Describes the life cycle of a LED.
L= Preservation of luminous flux in %
B= Proportion of modules affected in %
L70B10 therefore means that a maximum 10% of modules attain less than 70% of the original luminous flux.
UGR= Unified Glare Rating. Indicates the standardised value of psychological glare.
The smaller the value is, the lower the glare.
Describes the deviation of the colour point or colour consistency that may arise within several batches of the same products.
IP = Ingress Protection. Indicates the level of protection for the housing against external influences, in compliance with DIN EN 60529. The first figure describes protection against foreign bodies, the second figure describes protection against water. The higher the individual values are, the higher the respective protection level is.
Secondary power / secondary voltage
Different light outlets
Primary nominal voltage
maximum ambient temperature
Describes the maximum temperature that should not be exceeded, so that device life expectancy is not negatively influenced, and functioning continues optimally for as long as possible.
minimum ambient temperature
Describes the minimum temperature required, so that device life expectancy is not negatively influenced, and functioning continues optimally for as long as possible.
Rotating or tilting
LED can be changed
Exchange of lightsource only by professional
Luminous intensity distribution
Describes the spatial dispersion traits of a light source.