The GLENOS pendant with a high-performance LED strip gives you a powerful, top-class LED lighting. The pendants are available in several lengths and colour variants and are fitted with a 2.50 m connection lead, which can be shortened individually. The GLENOS pendant is ready to connect to the 230 V mains supply thanks to the dimmable LED driver.
1-10 V dimming
This product is dimmable using a 1-10 V dimmer.
IP protection rating
The IP protection class indicates the suitability of electrical equipment for different environmental conditions.
Replaceable LED - qualified person
This product contains an LED, which can be replaced by a qualified individual.
UGR= Unified Glare Rating. Indicates the standardised value of psychological glare. The smaller the value is, the lower the glare.
This product belongs to an SLV light family
CRI= Colour Rendering Index (colour rendering index Ra). Describes the quality of artificial light compared to daylight (Ra=100) . The higher the value is, the more natural the rendering of illuminated colours.
UGR= Unified Glare Rating. Indicates the standardised value of psychological glare.
The smaller the value is, the lower the glare.
Different light outlets
This product is dimmable!
Requirement for safety measures in place against electric shocks, applying to electric devices.
Protection category I: Protective earthing
Protection category II: Protective insulation
Protection category III: Protective extra-low voltage
IP = Ingress Protection. Indicates the level of protection for the housing against external influences, in compliance with DIN EN 60529. The first figure describes protection against foreign bodies, the second figure describes protection against water. The higher the individual values are, the higher the respective protection level is.
Rotating or tilting
Luminous intensity distribution
Describes the spatial dispersion traits of a light source.
Describes the deviation of the colour point or colour consistency that may arise within several batches of the same products.
Primary nominal voltage
Secondary power / secondary voltage
-20 - 50 °C
Describes the minimum temperature required, so that device life expectancy is not negatively influenced, and functioning continues optimally for as long as possible.
Describes the life cycle of a LED.
L= Preservation of luminous flux in %
B= Proportion of modules affected in %
L70B10 therefore means that a maximum 10% of modules attain less than 70% of the original luminous flux.