indoor LED mirror light white CCT switch 3000/4000K,More
Item no.: 1003507
250+ in Stock
The GLENOS mirror light has a high-performance LED strip and a beautifully elegant, slimline appearance. The mirror light is available in black, white or grey and its L-shaped mounting profile ensures glare-free illumination of the mirror. Thanks to the integrated CCT switch, the light colour of the fitting can be switched between 3000K and 4000K.
IP protection rating
The IP protection class indicates the suitability of electrical equipment for different environmental conditions.
Replaceable LED - qualified person
This product contains an LED, which can be replaced by a qualified individual.
This product belongs to an SLV light family
By using the CCT switch integrated in this product, the light colour can be configured at installation to 3000K or 4000K.
Also called radiation angle, describing the angle between two points, at which luminosity falls to 50% of the maximum value.
CRI= Colour Rendering Index (colour rendering index Ra). Describes the quality of artificial light compared to daylight (Ra=100) . The higher the value is, the more natural the rendering of illuminated colours.
Colour temperature setting via switch
Requirement for safety measures in place against electric shocks, applying to electric devices.
Protection category I: Protective earthing
Protection category II: Protective insulation
Protection category III: Protective extra-low voltage
IP = Ingress Protection. Indicates the level of protection for the housing against external influences, in compliance with DIN EN 60529. The first figure describes protection against foreign bodies, the second figure describes protection against water. The higher the individual values are, the higher the respective protection level is.
Luminous intensity distribution
Describes the spatial dispersion traits of a light source.
Describes the deviation of the colour point or colour consistency that may arise within several batches of the same products.
Primary nominal voltage
Secondary power / secondary voltage
-20 - 40 °C
Describes the minimum temperature required, so that device life expectancy is not negatively influenced, and functioning continues optimally for as long as possible.
Describes the life cycle of a LED.
L= Preservation of luminous flux in %
B= Proportion of modules affected in %
L70B10 therefore means that a maximum 10% of modules attain less than 70% of the original luminous flux.