The BATTEN LED 30 light bar has 26 long-life LEDs. The light bar is available in several lengths, and with neutral or warm-white light colour. For simple installation, suitable fastening clips are included. The electrical connection is made using the connection lead and mains plug directly to the 230V mains supply. This luminaire contains built-in LED lamps.
CRI= Colour Rendering Index (colour rendering index Ra). Describes the quality of artificial light compared to daylight (Ra=100) . The higher the value is, the more natural the rendering of illuminated colours.
Requirement for safety measures in place against electric shocks, applying to electric devices. Protection category I: Protective earthing Protection category II: Protective insulation Protection category III: Protective extra-low voltage
Describes the life cycle of a LED. L = Preservation of luminous flux in % B= Proportion of modules affected in % L70B10 therefore means that a maximum 10% of modules attain less than 70% of the original luminous flux.
Describes the deviation of the colour point or colour consistency that may arise within several batches of the same products. (Unit: SDCM)
IP = Ingress Protection. Indicates the level of protection for the housing against external influences, in compliance with DIN EN 60529. The first figure describes protection against foreign bodies, the second figure describes protection against water. The higher the individual values are, the higher the respective protection level is.
Secondary power / secondary voltage
Primary nominal voltage
maximum ambient temperature
Describes the maximum temperature that should not be exceeded, so that device life expectancy is not negatively influenced, and functioning continues optimally for as long as possible.
minimum ambient temperature
Describes the minimum temperature required, so that device life expectancy is not negatively influenced, and functioning continues optimally for as long as possible.
LED can be changed
LED lightsource not replaceable
Luminous intensity distribution
Describes the spatial dispersion traits of a light source.
Also called radiation angle, describing the angle between two points, at which luminosity falls to 50% of the maximum value.