The aluminium luminaires in the ABRIDOR family provide solutions for the wall light and floor stand area. Thanks to its IP55 protection class, the luminaires are suitable for outdoor use. The electrical connection is made directly to the 230V mains power supply. The unusual lamp head means that the built-in LED has particularly wide light distribution.
IP protection rating
The IP protection class indicates the suitability of electrical equipment for different environmental conditions.
IK impact resistance rating
The IK impact resistance rating is a measure of the resistance of the housing of electrical equipment to mechanical stress, especially impact stress.
Lightbulb cannot be replaced
The product light bulb cannot be replaced.
This product belongs to an SLV light family
By using the CCT switch integrated in this product, the light colour can be configured at installation to 3000K or 4000K.
CRI= Colour Rendering Index (colour rendering index Ra). Describes the quality of artificial light compared to daylight (Ra=100) . The higher the value is, the more natural the rendering of illuminated colours.
Colour temperature setting via switch
Requirement for safety measures in place against electric shocks, applying to electric devices.
Protection category I: Protective earthing
Protection category II: Protective insulation
Protection category III: Protective extra-low voltage
IP = Ingress Protection. Indicates the level of protection for the housing against external influences, in compliance with DIN EN 60529. The first figure describes protection against foreign bodies, the second figure describes protection against water. The higher the individual values are, the higher the respective protection level is.
Rotating or tilting
Luminous intensity distribution
Describes the spatial dispersion traits of a light source.
Shock resistance category
Indicates resistance or impact resistance levels of electrical equipment housings against mechanical wear and tear. The higher the category is, the higher the level of protection.
Indicates which impact energy the light can be exposed to. This value is important, for example when determining if lighting is safe enough to throw balls in sports halls.
Primary nominal voltage
Secondary power / secondary voltage
-25 - 40 °C
Describes the minimum temperature required, so that device life expectancy is not negatively influenced, and functioning continues optimally for as long as possible.
Describes the life cycle of a LED.
L= Preservation of luminous flux in %
B= Proportion of modules affected in %
L70B10 therefore means that a maximum 10% of modules attain less than 70% of the original luminous flux.